Platinum and Gold Electrodes for measurement of oxidation-reduction potentials (ORP).

All electrodes available with either Ag/AgCl or Calomel half-cells with coaxial ceramic wicks.

All electrodes can be used continuously 0-80°C. Ag/AgCl electrodes can be used intermittently up to 100°C.

• Offers excellent results with minimal maintenance.
• Large area, coaxial ceramic reference wick resists clogging and performs longer.
• All models also available with calomel half-cell or double junction.

A. Platinum Band Combination Electrode

This polymer body electrode is used for measurements of oxidation-reduction potential (ORP). Pt band 0.25" O.D. x 0.10" L

B. Platinum Band Combination Electrode with removable tip guard

This polymer body, platinum band redox electrode has a removable tip guard. Pt band 0.025" O.D. x 0.10" L

C. General Purpose Gold Wire Combination Electrode

This polymer body, gold wire redox electrode has a removable tip guard. Gold wire 0.040" O.D. x 0.4" L

Primarily there are four things we need to know in order to correctly fill your order.

1. Electrode Model Number — Each electrode has a ten character model number.

2. Cable Type — All lab electrodes are equipped with Type A, low noise, 3 mm, coaxial cable. Place the A after the electrode number.

3. Cable Length — The cable length is expressed in feet immediately after the cable type. Example: "-A03" stands for a three foot cable which is standard for all electrodes in this catalog. Follow model numbers by a"-DK" for a threaded electrode cap.

4. Connector — The cable length is followed by a two letter designation for the proper connector. All connectors are available. If you do not see what you need on this page, give us the make and model numbers of your pH meter and we will supply the proper connector.

Example: C13PIA-521-AO3SC