|
|||||||||||
| Lab Probes — Standard Redox/ORP Electrodes | |||||||||||
| Ordering Information A selection of Platinum Redox electrodes to measure oxidation-reduction potentials (ORP). |
||
|
|
||
| ELECTRODE DESCRIPTIONS | ||
A. Platinum Band Redox Electrode Pt Band 0.25" O.D. x 0.10" L. Glass Body |
 |
|
|
||
B. Platinum Band Combination Redox Electrode Ag/AgCl half-cell with coaxial ceramic wick. 0°–100°C. Pt band 0.25" O.D. x 0.10" L. Glass body |
||
|
||
|
|
||
| How To Order An Electrode
Primarily there are four things we need to know in order to correctly fill your order. 1. Electrode Model Number — Each electrode has a ten character model number. 2. Cable Type — All lab electrodes are equipped with Type A, low noise, 3 mm, coaxial cable. Place the A after the electrode number. 3. Cable Length — The cable length is expressed in feet immediately after the cable type. Example: "-A03" stands for a three foot cable which is standard for all electrodes in this catalog. Follow model numbers by a"-DK" for a threaded electrode cap. 4. Connector — The cable length is followed by a two letter designation for the proper connector. All connectors are available. If you do not see what you need on this page, give us the make and model numbers of your pH meter and we will supply the proper connector. |
||
|
|
||
| 1. Model Number C13PIA-521- 2. Cable Type A 3. Cable length in feet O3 4. Connector SC Example: C13PIA-521-AO3SC |
||
|
|
||
| Connectors For Combination Electrodes | ||
|
|
||
| SC — U.S. Standard Combination Plug |  |
|
| BC — BNC Coaxial Plug |  |
|
| DN — Coaxial Plug for DIN 19262 socket |  |
|
|
|
||
|
Copyright © 2007 Broadley-James Corporation. All Rights Reserved. |