Chemical-resistant Wetted Materials These high quality sensors are constructed of corrosion-resistant wetted materials including Ryton®, Teflon® and glass.
Coaxial Porous Teflon® Reference Junction The large annular junction resists fouling. Also, the sealed, double-junction reference electrode is highly resistant to poisoning.
Options Include:
Built-in temperature compensation
Built-in solution ground
Custom cable lengths
Choice of cable connectors
SPECIFICATIONS
pH Range
0–14 pH Range
ORP Range
± 5000 mV
Temp Range
0–105ºC
Max Pressure/Temp
150 psig at 100ºC
Reference
Ag/AgCl
Wetted Materials
Ryton, Teflon & Glass
Standard cable length
10 feet
Before you call to place your order, please print out this page and fill in this PART# BOX by selecting from options below. Boxes 1-10 must be filled in.
Part #
1
2
—
3
4
5
6
7
—
8
9
10
11
12
S-4
1
0
—
—
OPTIONS
—
Check options 1-10 below to complete PART# BOX above.
1 — 2 Body Style
[10] Standard Insertion, No Guard, 3/4" NPT
3 — Body Material
[R] Ryton®
[G] Grounded *(see note below)
4 — Liquid Junction:
[T] Coaxial Teflon®
[R] Recessed Coaxial Teflon® (only available on probes without T.C.)
5 — 6 Measurement Electrode:
[33] pH, HT-3 Rugged Dome Bulb
[43] pH, HT-4 High pH Bulb (for pH 13 and above)
[PB] ORP, Platinum Band
[17] pH, General Purpose, Flat Bulb
7 — Temperature Compensator:
[0] T.C. not required
[1] 3K Ohms, used on older models of TBI/Bailey & Uniloc transmitters
[9] 301Ohms for use with older Great Lakes models, such as 60, 70, 90, 570 and 690
[D] Pt 100 Ohms for Rosemount (Uniloc) 1054, Beckman SoluComp, TBI/Bailey TB82 & TB84, Foxboro 870 & 874, Yokogawa and many European models
[H] Pt 1000 Ohms for Yokogawa, Conducta, Polymetron and many European models
8 — Cable Type:
[A] 3 mm Low Noise Coax, for pH without built-in TC, or for ORP
[M] 5 mm Low Noise Coax, for pH without built-in TC, or for ORP
[E] Jacketed Coax w/ TC leads
[N] Jacketed Coax w/ TC and solution ground leads
9 — 10 Cable Length:
[10] 10 ft - standard length
[XX] Specify length (in feet) if other than standard (see above for price adder per foot)
11 — 12 Sensor Connectors:
[BC] BNC only (for use with ORP electrodes or with sensors w/o TC or solution ground)
[FB] BNC for pH and Ferrules on all other leads (for use with Terminal Block or Terminal Strip)
[FF] All Ferrule connectors (for use with Terminal Block or Terminal Strip)
